RTS Cstrunk Spécifications télécharger pdf (Page 52)

> Select Mod Assign, and then tap PGM.

Cancel? displays. To exit the procedure without making changes, tap PGM.

All of the alphanumeric displays, except Mod 1, appear as shown in FIGURE 10. Assign the Mod IDs as shown in the figure.

Repeat the procedure for each module.

NOTE: You do not need to run Save Cfg after changing Mod assignments.

Service Menu, Output Level

Allows the adjustment of the nominal audio output level to the matrix from 0 dB to +8 dB.

1. Select Outp Level, and then tap PGM.

+8dB displays.

2. Press ↓↓ or ↑↑ to adjust the levels.

3. Tap PGM.

4. Tap CLR to exit.

5. Run Service Menu, Save Cfg, to store the Output Level settings.

Service Menu, Preamp Out (GPI Option Only)

Allows the user to choose how audio is routed to the Preamp Output connector. When Switched is chosen, keypanel audio is

routed to the preamp output connector when a talk key is latched. When Hot Mic is chosen, audio is always available at the

preamp output connector. When Disabled is chosen, keypanel audio is isolated from the preamp output connector.

1. Select Preamp Out, then tap PGM.

♦Switched displays.

2. Press ↓↓ to toggle between Switched, Hot Mic, and Disabled.

3. Tap PGM.

4. Tap CLR to exit.

FIGURE 10. Mod ID assignments for the KP-632 and EKP-632

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 103 104

Pas de commentaire

RTS Cstrunk Spécifications Page 52