RTS KP95 Guide d'installation télécharger pdf (Page 26)

Operation

KP-32 Addressing

A rotary switch is used to indicate the locgical port address the keypanel is to use when communicating with the Matrix. The

switch is read continuously through polling by the Matrix. If the port address is changed the new address is not seen on a

powered unit until the power is recycled.

NOTE: The Address port, by default, is shipped with an invalid address to ensure that there are no conflicts with existing

keypanels. It is important to set the address port for the KP-32 keypanel for it to function properly.

In Zeus, ADAM CS, and ADAM intercom system, intercom ports are arranged in groups of 8. Within each group, each

keypanel is uniquely identified by its Address switch setting.

ADAM CS Intercom Port Numbers

(Grouped by Audio Input/Output Card Numbers)

Logical Keypanel Number (See

Table X for DIP switch

Settings)

Card 1 Card 2 Card 3 Card 4 Card 5 Card 6 Card 7 Card 8

1 9 17 25 33 41 49 57 1

2 10182634425058 2

3 11192735435159 3

4 12202836445260 4

5 13212937455361 5

6 14223038465462 6

7 15233139475563 7

8 16243240485664 8

TABLE 3.

Relationship between Audio Input/Output Cards, Intercom Ports, and Logical Keypanel Numbers

Logical Keypanel

Number

Address DIP Switch Settings

SW4 SW5 SW6 SW7

1 Closed Open Open Open

2 Open Closed Open Open

3 Closed Closed Open Open

4 Open OpenClosedOpen

5 Closed Open Closed Open

6 Open Closed Closed Open

7 Closed Closed Closed Open

8 OpenOpenOpenClosed

TABLE 4.

Address Switch Settings for KP-95/96/97/98 Keypanels and the TIF-2000

Telephone Interface

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Pas de commentaire

RTS KP95 Guide d'installation Page 26