RTS KP95 Manuel d'utilisateur télécharger pdf (Page 15)

Advant Controller 31 / Issued: 03.99

11 Hardware 07 KP 90 R303

8 .1

1.7 Technical data

In general, the details in section 1 ”System data and system structure” of volume 2 of the system description ”Advant

Controller 31” apply as technical data. Supplementary and deviating data is listed below.

1.7.1 General data

Number of serial interfaces 2

Number of parallel interfaces 1 networking interface for connecting to the

Advant Controller 31 basic unit

Operating and error displays 6 LEDs: RUN, ERR, Supply, RxD, TxD, BLK

Conductor cross section for the max. 2.5 mm

removable terminal blocks

1.7.2 Power supply for 07 KP 90 R303

Rated supply voltage 24 V DC

Power dissipation typ. 2.5 W

max. current consumption

with rated voltage 210 mA

with a supply voltage of 30 V 170 mA

Protection against reversed terminal connection yes

1.7.3 Serial interfaces RCOM and CONSOLE

Interface standard EIA RS-232 or EIA RS-485 (RCOM only)

Electrical isolation yes, RCOM interface with respect to the rest of the unit

(see also Fig. 5)

Potential differences So that no earthing potential differences arise between

the 07 KP 90 R303 and the peripheral units connected

to RCOM and CONSOLE, the latter are supplied from

the switch-gear cabinet mains socket (also see earthing

connections in Figure 5).

Transmission speed (Baud rate)

RCOM 300...19200 Baud

CONSOLE 9600 Baud

Terminal assignment and description

of the interfaces RCOM, CONSOLE see page 8 onwards

1.7.4 LED displays

LEDs for operating and error displays:

– Supply voltage present (Supply) 1 green LED

– Fatal or serious error occurred (ERR) 1 red LED

– Ready for RCOM communication (running), (RUN) 1 green LED

– Interface signals RxD, TxD 2 yellow LEDs

– Protocol status BLK 1 yellow LED

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 89 90

Pas de commentaire

RTS KP95 Manuel d'utilisateur Page 15