RTS XCP-ADAM-MC Manuel de service télécharger pdf (Page 17)

TELEPHONE OPERATION

☞

Note: Telephone operations require an optional TIF-951 Telephone Interface. Also, you must first

assign an intercom key to talk/listen to the TIF. We recommend a talk+auto listen assignment.

RECEIVING A PHONE CALL

When there is an incoming telephone call, the talk LED will flash red next to the KP-32 key that is assigned

to the TIF. Activate the key to answer the call.

☞

The red flash for incoming TIF call is the default operation. Alternatively, a continuous-red talk LED

indication can be provided. This is accomplished by checking the check box "Don't generate tallies for

TIF or trunk use" in ADAMedit (Options menu, Intercom Configuration, Options tab). Note that this

check box also affects other tally indications. For further information, press the F1 key while viewing

the ADAMedit Options tab settings. Under the topic "Don't generate tallies for TIF or trunk use" click

on the "see table" link to view a table containing information about operation with and without tally

indications.

DIALING AND HANGING UP USING THE KP9X KEYPAD SEQUENCES

KP9X Keypad Hang-up Sequence

1. Turn off the TIF talk key. (Tap "down" to toggle talk off. The talk LED should be off.)

2. On the keypad, tap

PHONE

CLR

3. Momentarily turn the TIF talk key on, then off. The TIF key talk and listen indicators will turn off and

the TIF-951 "OFF" LED will activate.

☞

You can use the hang up sequence to hang up the TIF even if you did not place or answer the call.

KP9X Manual dial sequence

1. Activate the TIF listen key. (Tap "up" to toggle listen on. The listen LED should be on.)

2. Make sure the TIF talk key is off (Talk LED off).

3. On the keypad, tap

CLR

PHONE

PGM

4. Activate the TIF talk key. The talk LED turns green, the "ON" LED at the TIF-951 activates, and you

should hear dial tone at the KP-32.

5. Dial the telephone number. Digits scroll in the display above the TIF key.

6. When the far end answers, you can dial additional digits (to access a mail system or automated

response system, etc.). When finished dialing, momentarily turn off the TIF talk key to end dialing

mode (talk LED turns red).

7. Turn the TIF talk key back on for conversation.

8. To end the call:

a. Turn the TIF talk key off.

b. Tap

PHONE

CLR

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 57 58

Commentaires sur ces manuels

Pas de commentaire

RTS XCP-ADAM-MC Manuel de service Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Interphones de porte RTS XCP-ADAM-MC