7.4.5 MENUS, KEY OPT, COPY
COPY lets you copy one key’s option assignments to another key.
When you select COPY, the call waiting window will display TAP ORIG. Tap the original key
from which you want to copy. After you tap a key, the call waiting window will display TAP
DEST. Tap the destination key to which you want to copy. The display above the destination key
will briefly display OK to verify the assignment.
Double-click the SELECT control to return to the previous menu level. Or, press and hold the SE-
LECT control for about two seconds to exit menu mode.
Remember to save your changes if you want them retained for future use. See “SERVICE MENU,
SAVE CFG”, page
45.
7.4.6 MENUS, KEY OPT, GROUP (1-4)
This feature lets you add a group master function to an intercom key and then select keys to be ac-
tivated whenever that group master key is activated. The underlying key assignment for each key
in the group can then be activated by the group master key. Create a group as follows:
1. In the KEY OPT menu, rotate the SELECT control to select GROUP 1, 2, 3, or 4. Then, click
the SELECT control.
2. The call waiting window will display TAP MAST. Tap the intercom key that will be the
group master key. The talk and listen indicators for the selected key will flash green,
depending on whether talk, listen, or both are currently setup on the key. This confirms the
group master assignment.
☞
You cannot assign group operation to any key that is programmed for solo operation
(described below) or that is locked on or off using button lock (BTN LOCK, page
37). If you
attempt to assign group operation to these keys, the call waiting window will display either
SOLO ERR (solo error), or LOCK ERR (lock error). If an error occurs, group assignment will
terminate and you will have to start again after the problem is corrected.
3. Next, the call waiting window will display TAP KEYS. Tap other intercom keys as desired to
assign them or remove them from the group. The talk and/or listen indicators will turn green
for those keys that are assigned to the group. (Indicators will light according to the way the
keys have been assigned. For example, if a key has been assigned for talk only, the talk
indicator will be green and the listen indicator will be off.)
4. When finished assigning keys, double-click the SELECT control to return to the previous
menu level. Or, press and hold the SELECT control for about two seconds to exit menu mode.
5. Save the group to retain it for future use. (See “SERVICE MENU, SAVE CFG”, page 45.)
7.4.7 MENUS, KEY OPT, LATCHING
The default setting for intercom keys permits them to be latched on for hands-free talk. This fea-
ture may be deactivated for selected keys.
When you select LATCHING from the KEY OPT menu, the call waiting window will display TAP
KEYS. Tap keys as desired to enable or disable latching. The talk indicators will turn green for all
keys that have latching enabled and will be off for keys that do not have latching enabled.
38 User Manual, DKP-8, DKP-12 and KP-12 Keypanels with Push-button Keys
(90 pages)
(36 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels