
TECHNICAL DATA PACKAGE
Model RMS300
TW
Intercom System Rack Mount Speaker User Station
1.2
MODEL RMS300 SPECIFICATIONS
OVERALL SYSTEM SPECIFICATIONS
Audio Line Voltage, Nominal
1
volt, peak (0 dBm voltage-equivalent)
Average Speech Level Range
-20 dBV to -10 dBV
Absolute Maximum Speech Level 3 volts, peak (linear limit)
Audio Line Impedance, Nominal 200 50 ohms, 75 Hz to 20kHz
System will continue to operate from 50 ohms to 300 ohms
System DC Line
Voltage
Nominal
Operational Range
Steady state without damage
Transient
System DC Current
Quiescent (per station)
Dynamic (per station)
Start-Up Current
~ault Current
Operating Distances
Maximum DC limit
Maximum AC limit
System Capacitance
32 volts DC
18 to 35 volts DC
-1.5 volts to
36
volts DC
200 volts,
8
milliseconds or less (after this time, power supply and
user station fuses will open)
10 to
40
milliamps
50 milliamps (w/25 ohm headphones)
70 milliamps (w/25 ohm headphones and lights)
100 milliamps (w/8 ohm speaker)
1.25 amperes, 50 units,
all
kinds
4.0 amperes, power supply at voltage
>
12 volts
1.0 amperes, power supply at voltage
<
12 volts
5,000 ft. distance along cable, power supply to single station #22
gauge wire -DC voltage drop limitation
10,000 ft. dry pair, power supply at each end, #22 gauge wire
0.3 microfarads (cumulative effect of 10,000 ft. of Maximum cable at
30 picofarads/foot)
RTS Systems, Burbank, CA 91506
/
FSCM: 60572 TDP3504
/
Third Edition, Sept. 1989
Page 1-3
Commentaires sur ces manuels