RTS XCP-ADAM-MC Manuel d'utilisateur télécharger pdf (Page 30)

Access Serial Command Mode

There are many different serial port commands supported from here but it is NOT recommended that any be used EXCEPT:

d/jointfilesconvert/301556/bgcmd

1. Type “d/jointfilesconvert/301556/bgcmd”, then press Return.

This places the serial port into the MXP> (MXP command mode)

The MXP Command Mode is the only mode that will be used. The table below is a list of commands supported from the MXP

Shell Prompt.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 58 59

Pas de commentaire

RTS XCP-ADAM-MC Manuel d'utilisateur Page 30