RTS XCP-48-RJ45 Manuel d'utilisateur télécharger pdf (Page 25)

Vox Settings in AZedit

Screen Item Field Type Description

Threshold

Adjust arrow keys

Use the

UP or Down arrow keys to increase or decrease the vox threshold by.5 dB (-127 dB

to 0.0 dB). You can see the level adjustments in the parameter display window (to the right).

NOTE: You can select multiple ports to change at the same time. However, when you

increase or decrease the threshold of multiple ports the levels change from each port’s starting

dB level. For example, Port 002 is set to -82.5 dB and Port 010 is set to -30.0. If both are

selected and the vox threshold is increased by clicking the up arrow twice the ending threshold

for each port would be as follows:

Port 002 = -81.5

Port 010 = -29.0

Threshold Level display box

The

Threshold Level display box displays the threshold level selected by the slider bar

below.

Threshold adjust slider

The Threshold Adjust slider allows you to set the vox threshold by moving the slider right

(increase) or left (decrease).

NOTE: This sets the threshold to the level you set by the slider bar. It does not increase or

decrease the threshold from the individual port starting dB.

Slide the threshold slider bar to the level you want to set the port (s) selected.

Set To button

The

Set To button activates the Threshold Level slider selection. The Set To button must be

clicked to accept the threshold level.

Once the threshold slider is at the desired threshold level, click Set To.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 53 54

Pas de commentaire

RTS XCP-48-RJ45 Manuel d'utilisateur Page 25