RTS XCP-48-RJ45 Manuel d'utilisateur télécharger pdf (Page 43)

RVON Configuration

2. At the prompt, type tracert and type the url or IP Address you want to trace.

3. Press Enter.

The details of the tracer route are displayed.

NOTE: You will the message “request timed out” if the IP Address/ port IN or OUT is denied to the incoming or outgoing

message.

4. When you are finished, type exit to close the Command Prompt screen.

RVON Configuration

RVON cards use ports for communication of audio and control packets. Because routers can be configured to block certain

incoming and outgoing requests, you will need to open the following ports in your network to allow WAN connections to and

from a Network Interface Device. See the table below for the ports that need to be opened for the RVON cards to operate prop-

erly.

Table 4. Ports necessary for RVON card functionality.

Port Port Description

2076 UDP Call Control Signalling

2077 UDP Audio Packets

2079 UDP Telex Proprietary Signalling

2080 TCP Telex Keypanel Protocol

2081 UDP Pass Through Serial

2082 TCP Firmware Download

2100 Remote Administration

2102 Authentication Server

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 53 54

Pas de commentaire

RTS XCP-48-RJ45 Manuel d'utilisateur Page 43