RTS XCP-48-RJ45 Manuel d'utilisateur télécharger pdf (Page 26)

Cronus and AZedit

Hold Time

Adjust arrow keys

Use the

UP or Down arrow keys to increase or decrease the time the port is active from

meeting the threshold level set above. Once a port meets or exceeds its threshold level, the

hold time determines how long that port will stay active before closing (up to 12.5 seconds).

You can see the adjustments in the parameter display window (to the right)

NOTE: You can select multiple ports to change at the same time. However, when you

increase or decrease the hold time of multiple ports the time changes from each port’s starting

point. For example, Port 002 has a hold time of 0.7 seconds and Port 010 has a hold time of

1.0. If both are selected and the hold time is increased by clicking the up arrow twice the

ending threshold for each port would be as follows:

Port 002 = 1.7

Port 010 = 2.0

Hold Time display box

The

Hold Time display box displays the hold time level selected by the slider bar below.

Hold Time Adjust slider

The Hold Time Adjust slider allows you to set the time by moving the slider right (increase)

or left (decrease).

NOTE: This sets the threshold to the level you set by the slider bar. It does not increase or

decrease the threshold from the individual port starting dB.

Slide the hold time slider bar to the level you want to set the port (s) selected.

Set To button

The

Set To button activates the Hold Time slider selection. The Set To button must be clicked

to accept the hold time.

Once the hold time slider is at the desired level, click Set To.

Options

Show Enabled Only check box

The

Show Enabled Only check box, when selected will only display the Vox enabled

ports in the display list to the right. When the check box is cleared, all ports are displayed.

Real-Time Changes check box

The

Real-Time Changes check box allows you to see the adjustments to the Vox and hold

time dynamically on the connected device (Cronus or AIO-16).

NOTE: When making adjustments from the front panel of the Cronus take into consideration

that AZedit has a 5 second display refresh rate which will cause a delay in what is seen in the

application.

Parameter Display Window

Port display

The Port column displays the port identification number for the intercom port. This

identification number cannot be changed

Alpha display

The Alpha column displays the label given to the port (input/output) of the matrix. Alphas are

the names that appear in the alphanumeric displays on keypanels when keys are assigned to

talk to destinations in the intercom system. Alpha names for intercom ports are assigned using

Port Alphas setup. Alpha names for everything else are assigned using Other Alphas setup.

Supported? display

The

Supported? column displays whether the port is attached to a device that supports Vox

(either a Cronus or AIO-16 card).

NOTE: Cronus and AIO-16 are the only devices, presently, that support Vox.

When a green

Yes is displayed, the device supports Vox. When a red No is displayed, the

device does not support Vox.

Enabled? display

The

Enabled? column displays whether Vox is enabled on the specific port.

When a green

Ye s is displayed, Vox is enabled. When a red No is displayed it is not active.

Threshold display

The

Threshold column displays the threshold level for the specific port.

Hold Time display

The

Hold Time column displays the amount of time a port will stay active once the Vox

threshold level has been met or exceeded.

Audio? display

The

Audio? column displays whether audio is being detected on the port.

When a green

Ye s is displayed, audio is detected. When a red No is displayed, no audio is

detected.

Enable Vox button

The

Enable Vox button enables Vox on the selected port (s).

Select a port or multiple ports.

2. Click Enable Vox.

Vox is enabled on the selected port (s).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

RTS XCP-48-RJ45 Manuel d'utilisateur Page 26

Commentaires sur ces manuels

Produits connexes et manuels pour Interphones de porte RTS XCP-48-RJ45