RTS XCP-ADAM-MC Manuel d'utilisateur télécharger pdf (Page 33)

RVON-8 Specific Configuration

RVON-8 cards use ports for communication of audio and control packets. Because routers can be configured

to block certain incoming and outgoing requests, you will need to open the following ports in your network to

allow WAN connections to and from a Network Interface Device. See Table 4 for the ports that need to be

opened for the RVON-8 card to operate properly.

troP noitpircseDtroP

6702gnillangiSlortnoCllaCPDU

7702stekcaPoiduAPDU

9702gnillangiSyrateirporPxeleTPDU

0802locotorPlenapyeKxeleTPCT

1802laireShguorhTssaPPDU

2802daolnwoDerawmriFPCT

0012noitartsinimdAetomeR

2012revreSnoitacitnehtuA

Table 4. Ports necessary for RVON-8 Card Functionality.

Figure 4 is an example of a router configuration screen. Not all routers are configured the same way and may

not look exactly like this figure.

Note: Linksys™ only support up to 253 nodes on a router. This is why it is called a Router/Switch, because

there are WAN functions like a router as well as having a 4-port LAN switch. It also does not support

simultaneous forward and DHCP.

Figure 4. An example of a router configuration screen.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 41 42

Pas de commentaire

RTS XCP-ADAM-MC Manuel d'utilisateur Page 33