RTS XCP-48-RJ45 Manuel d'utilisateur Page 77

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 107
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 76
73
Serial Command Table
TABLE 4. Serial Command Table
Command Variable 1 Variable 2 Description
set rvon
Help screen which lists all “set rvon”
commands.
set rvon ip_addr X.X.X.X Set the IP Address for the RVON Card.
set rvon netmask X.X.X.X Set network mask for the RVON Card.
set rvon gateway X.X.X.X
Set the gateway IP Address for the RVON-8
card.
set rvon user abcdefg
Set the RVON user name for telnet access.
Default “telex”
set rvon password abcdefg
Set the RVON password for telnet access (8-40
characters).
Default “password”
set rvon vad_threshold [adaptive ⎢#]
Set the VAD threshold (silence detection)
Adaptive refers to auto-select. The # can be -20
to +10dBm.
set channel
[chan]
Help screen which lists all “set tcid” commands
(TCID 0-7).
set channel
[chan]
dest_ip X.X.X.X
Set the destination IP Address for this particular
RVON_Channel (same as tcid).
set channel
[chan]
dest_type X
dest_type X = 0 (rvon-8 or rvon-C), 1 (rvon-1),
2 (rvon-I/O).
set channel
[chan]
chan_codec X
Set the profile to use which includes the
compression codec see below (0-27).
set channel
[chan]
onhook Force the channel to disconnect the port.
set channel
[chan]
offhook Force the channel to connect the port.
set emac auto*
Enables auto-negotiation of the Ethernet
interface configuration.
set emac 10 half
Configures the Ethernet interface for 10Mbps
half duplex.
set emac 10 full
Configures the Ethernet interface for 10Mbps
full duplex.
set emac 100
half
Configures the Ethernet interface for 100 Mbps
half duplex.
set emac 100
full
Configures the Ethernet interface for 100 Mbps
full duplex.
set serial ip_addr X.X.X.X
Set the destination IP Address for this serial
pass-through port.
set serial baud X Set the baud rate to use: 50 through 115000.
Vue de la page 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 106 107

Commentaires sur ces manuels

Pas de commentaire